Online Questions and Answers Topic Outline
- MCQs in Basic Principles of Microwave Communications
- MCQs in Electro-Optics
- MCQs in Photonics
- MCQs in Optoelectronics
- MCQs in Electromagnetics
- MCQs in Avionics, Aerospace, Navigational and Military Applications
- MCQs in Medical Electronics
- MCQs in Cybernetics
- MCQs in Biometrics
MCQs in Microwave Communications and Principles Series
Following is the list of multiple choice questions in this brand new series:
Continue Practice Exam Test Questions Part V of the Series
201. IF repeaters are also called
- a) heterodyne receiver
- b) mixer/receiver
- c) radio receiver
- d) FM receiver
202. It is the difference between the nominal output power of a transmitter and the minimum input power required by a receiver
- a) RSL
- b) IRL
- c) system gain
- d) FSL
203. A phenomenon whereby the frequency of a reflected of a reflected signal is shifted if there is relative motion between the source and reflecting object.
- a) Doppler effect
- b) Hall effect
- c) Marconi effect
- d) Maxwell effect
204. A ferrite is
- a) a nonconductor with magnetic properties
- b) an intermetallic compound with particularly good conductivity
- c) an insulator which heavily attenuates magnetic fields
- d) a microwave semiconductor invented by Faraday
205. The primary purpose of the helix in a traveling-wave tube is to
- a) prevent the electron beam from spreading in the long tube
- b) reduce the axial velocity of the RF field
- c) ensure the broadband operation
- d) reduce the noise figure
206. The attenuator is used in the travelling-wave tube to
- a) help bunching
- b) prevent oscillations
- c) prevent saturation
- d) increase the gain
207. A magnetron is used only as
- a) amplifier
- b) oscillator
- c) mixer
- d) frequency multiplier
208. A backward-wave oscillator is based on the
- a) rising-sun magnetron
- b) crossed-field amplifier
- c) coaxial magnetron
- d) traveling-wave tube
209. Stripline and microstrip transmission lines are usually made with
- a) coax
- b) parallel lines
- c) twisted pair
- d) PCBs
210. Which of the following is not a microwave tube?
- a) Traveling-wave tube
- b) Cathode-ray tube
- c) Klystron
- d) Magnetron
211. Indicate which is not true. Compared with other types of radar, phased array radar has the following advantages
- a) very fast scanning
- b) ability to track and scan simultaneously
- c) circuit simplicity
- d) ability to track many targets simultaneously
212. Given the frequency and dimensions of 5 GHz and 7 cm by 9 cm respectively, the beam of the pyramidal horn is about ______.
- a) 27 degrees
- b) 53 degrees
- c) 60 degrees
- d) 80 degrees
213. The diameter of a parabolic reflector should be at least how many wavelengths at the operating frequency?
- a) 1
- b) 2
- c) 5
- d) 10
214. A type of microwave repeater where the received RF carrier is down-converted to an IF frequency, amplified filtered and further demodulated to baseband.
- a) RF repeater
- b) IF repeater
- c) baseband repeater
- d) radio repeater
215. In order to reduce cross-sectional dimensions, the waveguide to use is
- a) circular
- b) ridged
- c) rectangular
- d) flexible
216. Indicate which one of the following applications or advantages of radar beacons is false:
- a) target identification
- b) navigation
- c) very significant extension of the maximum range
- d) more accurate tracking enemy targets
217. Refers to more than one transmission path or method of transmission available between transmitter and a receiver.
- a) diversity
- b) polarization
- c) efficiency
- d) accuracy
218. A solution to the “blind speed” problem is to
- a) change the Doppler frequency
- b) vary the RF
- c) use monopulse
- d) use MTI
219. A direct path that exist between the transmit and receive antennas
- a) LOS
- b) direct waves
- c) space waves
- d) terrestrial waves
220. The function of the quartz delay line in an MTI radar is to
- a) help in subtracting a complete scan from the previous scan
- b) match the phase of the coho and the stalo
- c) match the phase of the coho and the output oscillator
- d) delay a sweep so that the next sweep can be subtracted from it
221. Type of diversity where it modulates two different RF carrier frequencies with the same IF intelligence, then transmitting both RF signals to a given destination.
- a) polarization diversity
- b) quad diversity
- c) space diversity
- d) frequency diversity
222. The coho in MTI radar operates at the
- a) intermediate frequency
- b) transmitted frequency
- c) received-frequency
- d) pulse operation frequency
223. Which type of diode does not ordinarily operate with reverse bias?
- a) Varactor
- b) IMPATT
- c) Snapp-off
- d) Tunnel
224. What happens when a horn antenna is made longer?
- a) gain increases
- b) beam width decreases
- c) bandwidth increases
- d) bandwidth decreases
225. A pyramidal horn used at 5 GHz has an aperture that is 7 cm by 9 cm. The gain is about
- a) 10.5 dB
- b) 11.1 dB
- c) 22.6 dB
- d) 35.8 dB
226. Type of diversity where the output of the transmitter is fed to two or more antennas that are physically separated by an appreciable wavelengths
- a) quad diversity
- b) wavelength diversity
- c) space diversity
- d) hybrid diversity
227. The Doppler effect is used in (indicate the false statement)
- a) moving-target plotting on the PPI
- b) the MTI system
- c) FM radar
- d) CW radar
228. A type of diversity where a single RF carrier is propagated with two different electromagnetic polarization.
- a) space diversity
- b) wavelength diversity
- c) polarization diversity
- d) hybrid diversity
229. The A scope displays
- a) the target position and range
- b) the target range, but not position
- c) the target position, but not range
- d) neither range nor position, but only velocity
230. The glass tube of a TWT may be coated with aquadag to
- a) help focusing
- b) provide attenuation
- c) improve bunching
- d) increase gain
231. Type of diversity which consists of a standard frequency diversity path where the two transmitter/receiver pair at one end of the path are separated from each other and connected to different antennas that are vertically separated as in space diversity
- a) quad diversity
- b) wavelength diversity
- c) space diversity
- d) hybrid diversity
232. The biggest disadvantage of CW Doppler radar is that
- a) it does not give the target velocity
- b) it does not give the target range
- c) a transponder is required at the target
- d) it does not give the target position
233. The combination of the frequency, space, polarization and receiver diversity into one system
- a) hybrid diversity
- b) quad diversity
- c) space diversity
- d) wavelength diversity
234. If the target cross section is changing, the best system for accurate tracking in
- a) lobe switching
- b) sequential lobing
- c) conical switching
- d) monopulse
235. The multicavity klystron
- a) is not good low-level amplifier because of noise
- b) has a high repeller voltage to ensure a rapid transmit time
- c) is not suitable for pulse operation
- d) needs a long transmit time through the buncher cavity to ensure current modulation
236. An arrangement that avoids a service interruption during periods of deep fades or equipment failures.
- a) service switching arrangement
- b) protection switching arrangement
- c) interruption switching arrangement
- d) equipment switching arrangement
237. A type of attenuator where attenuation is accomplished by insertion of a thin card of resistive material through a slot in the top of a waveguide
- a) flap attenuator
- b) vane attenuator
- c) slot attenuator
- d) directional coupler
238. After a target has been acquired, the best scanning system for tracking is
- a) nodding
- b) spiral
- c) conical
- d) helical
239. A duplexer is used
- a) to couple two different antennas to a transmitter without mutual interference
- b) to allow the one antenna to be used for reception or transmission without mutual interference
- c) to prevent interference between two antennas when they are connected to a receiver
- d) to increase the speed of pulses in pulsed radar
240. Type of protection switching arrangement where each working radio channel has a dedicated backup or spare channel
- a) hot swap
- b) hot backup
- c) hot standby
- d) hot diversity
241. If a return echo arrives after the allocated pulse interval,
- a) it will interfere with the operation of the transmitter
- b) the receiver might be overloaded
- c) it will not be received
- d) the target will appear closer than it really is
242. Points in the microwave system baseband signals either originate or terminate
- a) terminator
- b) terminal stations
- c) terminating equipment
- d) terminal equipment
243. A half wavelength, closed section of a waveguide that acts as a parallel resonant circuit is known as _____.
- a) half-wave section
- b) cavity resonator
- c) LCR circuit
- d) directional couple
244. Decreasing the volume of a cavity causes its resonant frequency to
- a) increase
- b) decrease
- c) remains the same
- d) drop to zero
245. The IF bandwidth of a radar receiver is inversely proportional to the
- a) pulse width
- b) pulse repetition frequency
- c) pulse interval
- d) the target will appear closer than it really is
246. Which of the following devices are not being used in microwave power amplifier?
- a) klystron tubes
- b) traveling wave tubes
- c) IMPATT
- d) magnetron
247. Which is not true? A high PRF will
- a) make the returned echoes easier to distinguish from noise
- b) make the target tracking easier with conical scanning
- c) increase the maximum range
- d) have no effect on the range resolution
248. It is a unidirectional device often made up of ferrite material used in conjunction with a channel-combining network to prevent the output from interfering with the output of another transmitter
- a) circulator
- b) magic tee
- c) isolator
- d) rat race
249. Which is not true about the following: Flat-topped rectangular pulses must be transmitted in radar to
- a) allow a good minimum range
- b) make the returned echoes easier to distinguish from the noise
- c) prevent frequency changes in the magnetron
- d) allow accurate range measurements
250. The power that leaks out of the back and sides of the transmit antenna interfering with the signal entering with the signal entering the input of a nearby receive antenna.
- a) ringaround
- b) ringabout
- c) roundabout
- d) turnaround
Post a Comment