Practice Exam Test Questions
Choose the letter of the best answer in each questions.
1. In AM, the carrier is changed by a modulating signal. What parameter of the carrier is changed?
- A. amplitude
- B. frequency
- C. pulse width
- D. phase
2. The intermediate frequency in a standard AM receiver is
- A. 455 Hz.
- B. 455 kHz.
- C. 4.55 MHz.
- D. none of the above
3. If a 1 MHz carrier is amplitude modulated with a 5 kHz audio signal, the upper-side frequency is _____ kHz.
- A. 1005
- B. 1000
- C. 995
- D. none of the above
4. For a four-quadrant linear multiplier, what is the output voltage, given input voltages of Vx = +2 V and Vy = –10 V?
- A. +2 V
- B. +1 V
- C. –2 V
- D. –1 V
5. Amplitude modulation is a _____ process.
- A. multiplication
- B. division
- C. sum/difference
6. The output spectrum of a _____ modulator includes upper-side and lower-side frequencies and the carrier frequency.
- A. balanced
- B. standard amplitude
- C. none of the above
7. An AM demodulator can be implemented with a linear multiplier followed by a _____ filter.
- A. low-pass
- B. high-pass
- C. band-pass
- D. band-stop
8. What does VCO stand for?
- A. Visually-Controlled Organization
- B. Voltage-Controlled Oscillator
- C. Voltage-Centered Oscilloscope
9. A phase-locked loop (PLL) is a feedback circuit consisting of a
- A. phase detector.
- B. low-pass filter.
- C. VCO.
- D. all of the above
10. Light may be propagated along a fiber-optic cable in which of the following modes?
- A. multimode step index
- B. single-mode step index
- C. multimode graded index
- D. all of the above
11. In order for a light ray to propagate along a fiber-optic cable, what must the relationship be between the angle of incidence and the critical angle?
- A. θi > θc
- B. θi < θc
- C. θi = θc
- D. none of the above
12. A certain fiber-optic cable has the following characteristics: n1 = 1.82 and n2 = 1.73. What is the value of θc?
- A. 1.0º
- B. 0.95º
- C. 18.1º
- D. 1.81º
TRUE/FALSE
1. Amplitude modulation is the process of varying the radio frequency with the modulating frequency.
- A. True
- B. False
2. The purpose of the balanced modulator is to remove the carrier frequency.
- A. True
- B. False
3. An AM signal is made up of a carrier, an upper-side frequency, and a lower-side frequency.
- A. True
- B. False
4. The mixer takes the RF signal along with the audio signal to produce the IF signal.
- A. True
- B. False
5. Selectivity in a receiver is provided by the resonant circuits of the IF section.
- A. True
- B. False
6. Frequency modulation is achieved by varying the frequency of an oscillator with a modulating signal.
- A. True
- B. False
7. A VCO is a variable capacitance oscillator.
- A. True
- B. False
8. The demodulator recovers the audio signal from the IF output.
- A. True
- B. False
9. The IF of an FM receiver operates at a center frequency of 455 kHz.
- A. True
- B. False
10. A balanced modulator is used in standard AM to obtain the sum and difference frequencies.
- A. True
- B. False
Post a Comment
Click to see the code!
To insert emoticon you must added at least one space before the code.